MN-10 Luxul Epic Mesh Single Node

The expectation with Luxul networking products is that they’ll deliver reliable, high-performance solutions; nothing changes when it comes to our mesh solution. This item can be configured as a router or wireless node. Each node in the network is able to communicate with other nodes, forming a point-to-point mesh. With Luxul’s mesh, you have the powerful wireless performance you expect from Luxul in an easy-to-sell, easy-to-install solution.

The Luxul Easy Setup App is a fast and simple way to configure your Epic Mesh system. To set advanced features, simply use a browser** to access the UI after the initial configuration is completed.

Specifications

Hardware Features

• Standards - IEEE.802.11b/g/n, 802.11a/n/ac
• Number of Ports - Two 10/100/1000M ports; Gigabit WAN to LAN speeds
• Antenna
  • 4 5GHz antennas
  • 2 dual-band antennas
  • 1 Bluetooth antenna designed for horizontal placement
• Dimensions LxWxH In. (mm) - 5.3”(135) x 5.3”(135) x 1.8”(45)
• Weight lbs (kg) - 1 (.5)
• LEDs - 1 multi-function single LED (can be turned off/on via user interface)
• Initial Setup - Easy Setup App via Bluetooth
• Button - Reboot or Reset
• Power Consumption - Maximum 30 watts
• Power Supply - External - 12v DC, 2.5A
• Operating Temperatures - 0 ~ 35°C (32-95°F)
• Operating Humidity - 10% - 90% non-condensing

Wireless and Other Features

• Design - Tri-band with dedicated 4x4 5GHz backhaul
• SSID - Supports up to 4 SSIDs per band for a total of 8 SSIDs
• Frequency - Concurrent 2.4GHz and 5GHz with Beamforming for client and backhaul
• Wireless Speed - 2.4GHz - 1.0Gbps* 5GHz - 2.167Gbps*
• Wireless Security - Open, WPA, WPA2, WPA/WPA2 mixed
• Other Functions and Features
  • WPA encryption, DHCP, IPV6, NAT, VPN passthrough, UPnP, WAN static IP, WAN PPPoE, WAN VLAN tagging, static leases, port forwarding, DMZ, wireless guest network, band steering, client roaming, airtime fairness, adaptive path selection
  • Backup and restore configurations
  • Firmware upgradeable
  • MU-MIMO with Beamforming
  • Nodes can be connected wired or wirelessly
  • Nodes can be configured as either a router or remote node
  • Guest network
• Certifications - FCC, IC, RCM, NCC, RoHS, CB Report

MN-10 Specifications PDF